Autocue QTV SSP10 manual

Autocue QTV SSP10
7.5 · 1
PDF manual
 · 2 pages
manualAutocue QTV SSP10



It is important that the camera lens is in the centre of
the aperture at the rear of the hood. This is achieved
by raising and lowering the camera mounting plate
and hood.

Camera Fixing

Fix the camera in place
using the camera screw
1/4” BSW
Connect the power supply
and the VGA or video cable.
Power Supply

Alternative Configuration

The SSP 10” monitor can be reconfigured to
straight read mode. To achieve this remove the
hood unit by loosening the two thumb screws of
the monitor mount and move the monitor to the
vertical position. Remove the monitor from the
bracket by removing the 4 screws and refit the
monitor in the correct orientation .

iPad Adaptor
By replacing the 10”
display with the iPad
adaptor it is possible to
mount an iPad 1 or 2
and use this as the
prompting display.
VGA Cable
iPad adaptor
Correct monitor
orientation for
straight read
Camera Screw


View the manual for the Autocue QTV SSP10 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Autocue QTV SSP10 or do you need help? Ask your question here

Need help?

Do you have a question about the Autocue QTV and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Autocue QTV owners to provide you with a good answer.

Number of questions: 0

Autocue QTV
not categorized
User manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Autocue QTV SSP10 below.

Is the manual of the Autocue QTV SSP10 available in English?

Yes, the manual of the Autocue QTV SSP10 is available in English .

Is your question not listed? Ask your question here

No results